Gallery

Killarney Heights

Specifications:

  • MDF Treads & Risers for Flooring Over
  • 2 Winder Set
  • Closed Vic Ash Face Stringers for Paint
  • 12mm Clear Toughened Frameless Glass to ceiling
  • S-Steel Patch Fittings Hidden by Stringers
  • 25x20 Stainless Steel Channel Fixed to Ceiling
  • (S8) Small Ellipse Spotted Gum Wall Rail
  • White Wall Brackets

Note: Paint/Stain & Flooring By Others
Location: NSW (2087)
Job Type:
Renovation

Read more...

Request a Quote More Photos

East Hills

Bottom Half Staircase Specifications:

  • Closed Pine Riser Mitered to Cut Stringer
  • 80mm Spotted Gum Treads w/ Square Aris Nosing
  • 20mm over riser (End Grain detail)
  • Bullnose Details
  • 1/4 Landing

Top Half Staircase Specifications:

  • Open Riser
  • 80mm Spotted Gum Treads w/ Square Aris Nosing
  • 40mm Spotted Gum Cut Stringers
  • Stringers set in 100mm from end of tread
  • Spotted Gum Floor Capping

Balustrade Specifications:

  • 12mm Toughened Clear Glass
  • 25 x 20 Stainless Steel Channel
  • 38mm Stainless-Steel Patch Fittings
  • 50mm Round Stainless-Steel Handrail
  • Standard Stainless-Steel Brackets

*Swipe to see Before & After photos*
Note: Paint & Flooring By Others

Read more...

Request a Quote More Photos

JANNALI

Specifications:

  • 30mm Blackbutt Treads
  • 5mm Shadow Line + End Grain Detail
  • Non-Slip Strips
  • Vic Ash Face Cut Stringer for Paint
  • Blackbutt Closed Risers
  • Toughened Frameless Glass
  • 50mm Stainless Steel Patch Fittings
  • 38mm Round Stainless Steel Wall Rail

Note: Paint/Stain By Others
Location:
NSW (2226)

Read more...

Request a Quote More Photos

Adelong

This staircase is constructed to match the contemporary open plan living design seen in many home renovations. This Grey Ironbark Staircase was constructed around its Sawtooth stringer. Both treads and risers are 32mm thick joined using an 8mm shadowline detail. The reason behind using a 32mm tread and riser is to create a jagged line of the same width from the ceiling to the floor below.

Specifications:

  • 32mm Grey Ironbark Treads & Risers
  • 8mm Shadowline Detail to Risers
  • Sawtooth Stringer
  • 12mm Toughened Frameless Glass
  • 50mm Round Stainless-Steel Patch Fittings
  • 50×25 Stainless-Steel Handrail
  • Two Aluminium Flat Bars for Non-Slip

Notes: 
Paint & Stain By Others.
The reason behind using a 32mm tread and riser is to create a jagged line of the same width from the ceiling to the floor below.
The Aluminium Bars protrude the top face of the tread by 1mm to give traction as you navigate the flight.
This material rarely used due to it’s availability is one of the densest and highly durable timbers on the market.
This inspired design from Stuart Wilson Construction in a project in the north shore is just another example of the quality of work produced by Stuart.
Builder:
Stuart Wilson Construction

Read more...

Request a Quote More Photos

Darlinghurst

This staircase is designed and constructed to match the contemporary open plan living design seen in many home renovations. This NSW Spotted Gum Staircase was constructed around the concealed glass fixings. This simple line becomes the focus of the staircase. The balustrades on this staircase were a major focus as we did not want to draw attention away from other design features.

Staircase Specifications:

  • 30mm Spotted Gum Treads
  • 1/2 Round Nosing
  • End Grain Detail
  • Vic Ash Cut Face Stringer
  • Spotted Gum Risers w/ 5mm Shadow Line
  • 1/2 Landing
  • 12mm Toughened Clear Frameless Glass
  • Stainless Steel Patch Fittings (hidden by stringer)
  • 50mm Stainless Steel Round Handrail
  • Spotted Gum Balustrade Floor Capping

Note: Stain By Others
Location:
NSW (2010)
Job Type:
Renovation

Read more...

Request a Quote More Photos